Touch button electrical coffee grinder
JX-650
This touch button electrical coffee grinder with touch control, reliable, good quality, stability, is designed and made by our factory, which is very popular in South Asia and other areas.
Product description
Touch button electrical coffee grinder |
|
JX-650 |
|
Rated Voltage/Frequency |
110-240V, 50-60HZ |
Rated Power(Moto Power) |
350W/1400RPM |
Bean Hopper Capacity |
1.5Kg |
GW/NW |
17.5Kg/14.5Kg |
Dimensions |
L33*W24*H64cm |
Packing Size |
L44*W30*H72cm |
Crushing Force(Small Ability) |
7~12Kgs/Hour |
Burrs Diameter |
64mm (Flat) |
Main Body(Material) |
Aluminum |
Hopper(Material) |
PC |
Color of the product:
Advantage of product
1. The burr is imported from Italy. It can grind about 1.5T before you replace the burr.
2. This machine can record one cup total amount, two cups amount and all amount. You can reset the whole data, too.
3. The capacity of hopper is big enough to 1.5kgs.
Exhibition information:
Cleaning and Maintenance
Before cleaning the machine, you must cut off the power and wait for the product cooling.
1. Cleaning the body of machine hopper and powder tray.
a. Remove the hopper, if there is coffee beans that have not been grinded completely, you should close the door of hopper.
b. You can put the hopper and powder tray into clean water to wash then keep them in the shade.
c. The body of the machine can be cleaned by wet cotton.
2. Cleaning the grinding mill
a. Take off the grinding dial .Use a screwdriver to take out the dial safety screw.
b. Remove the upper blade holder, make sure not loose three upper support springs.
c. Use a brush, a dry cloth, and a vacuum cleaner to clean the grinding chamber thoroughly.
d. Use a brush, a dry cloth and a vacuum cleaner to clean the upper blade thoroughly.